Flexible LED Matrix Panels for Vehicle and Shop Signage

Flexible LED matrix panels in 32×320, 32×256, 32×160 and 16×96 formats for vehicle displays, shop windows, stage and advertising signage.

GMH flexible LED matrix panels in 32x320, 32x256 and 16x96 pixel formats for vehicle and shop signage
Flexible LED matrix panels for vehicle, shop and event displays.
Short answer

LED matrix panels are configurable grids of addressable LEDs that display text, graphics and simple animations, widely used on vehicle signs, shop windows, food trucks and stage backdrops. GMH supplies flexible matrix panels in formats from 32×320 down to 16×96 pixels, suited to vehicle displays, advertisements, shop windows and event signage, exported to more than 100 countries.

Scope: what this product page covers

This page covers low-resolution flexible LED matrix panels used for moving text, symbols and simple graphics in signage. It does not cover fine-pitch full-colour indoor LED video walls or rental stage screens.

Specifications

Available formats32×320, 32×256, 32×160, 32×128, 32×96, 32×64, 16×192, 16×144, 16×96, 16×64, 16×32
Panel typeFlexible, bendable matrix panel
Display contentText, symbols and simple animations
Typical useVehicle, shop window, stage, event displays
MountingFront and rear mounting options
ControlProgrammable content controllers

Materials

  • Flexible PCB
  • SMD LEDs
  • Protective mask and diffuser
  • Connector cables and controller boards

Manufacturing process

  1. Format selection Content determines the format: long scrolling text suits high-width panels such as 32×320, while compact icons suit 16×96 and 32×64. Viewing distance also matters, since matrix panels are low-resolution by design.
  2. SMT assembly LEDs are placed on flexible PCB by SMT and reflow soldered. Flexible boards allow the panel to conform to curved vehicle roofs and shop-window contours.
  3. Testing Each panel is powered and checked for dead pixels, uniform brightness and controller compatibility before packing.
From the shop floor

LED Matrix Panels in production

Typical applications

  • Vehicle rooftop and rear window displays
  • Shop window and storefront messaging
  • Food truck and mobile vendor signs
  • Stage and event backdrop signage
  • Exhibition and promotional displays
  • Indoor and outdoor decorative signage

Quality and documentation

  • ISO 9001 quality management system
  • Dead-pixel and brightness check before packing
  • Flexible PCB for curved mounting surfaces
  • Controller compatibility verification
  • Export experience to more than 100 countries

What we do not do

Matrix panels are low-resolution display devices meant for text and simple graphics at a viewing distance. They are not a substitute for fine-pitch full-colour LED video walls, and are not intended for close-up video playback. Programmable content must comply with local advertising and road-safety regulations, especially on vehicles.

LED Matrix Panels

Technical questions

What is the difference between a 32×320 and a 16×96 matrix panel?

The numbers are the pixel grid. A 32×320 panel is much wider and shows long scrolling messages, while a 16×96 is compact and suits short text or icons. Choose by content length and viewing distance.

Can matrix panels be mounted on a curved surface?

Yes. These panels use a flexible PCB and can follow gentle curves such as a vehicle roof. They are not meant to be folded sharply — excessive bending can damage the LEDs and traces.

Can I display animations on these panels?

Simple animations and scrolling text are supported through the content controller. They are low-resolution panels, so detailed video is not suitable; use a fine-pitch video wall for that.

Are these suitable for outdoor vehicle use?

They are widely used on vehicles and shop fronts. Confirm the protection level of the specific panel and mounting method for your climate, and check local rules on moving displays while driving.

Related

Adjacent products and capabilities

LED Modules

LED modules are small, self-contained circuit boards or injection-moulded units that carry one or more LEDs and are mounted in rows inside channel letters and lightboxes to illuminate sign faces evenly. GMH makes the MH-series of 12V injection-moulded LED modules from 0.4W to 4W with 165°–175° beam angles, rated for 50,000 hours with lumen depreciation below 6%, from MOQ 200 pcs per model and a 5-day lead time on orders up to 1,000 sets..

View product

LED Strips & Neon Flex

LED strip lights are flexible circuit boards populated with surface-mount LEDs, while silicone neon flex is a strip enclosed in an extruded silicone diffuser that produces a smooth, continuous line of light. GMH supplies S-shaped lens strips from 12.5 mm to 50 mm board width with 10 mm 170°, 13.5 mm 180° and 18 mm 15°×35° lenses at 7.2–20W/m, flowing and pixel strips on 12V, 24V and 5V with external 16703 or built-in 2815 ICs, and silicone neon flex from 8 mm to 8×16 mm in 15 colours, with 2-year warranties..

View product

LED Power Supplies

An LED switching power supply converts mains AC voltage into the low-voltage DC that LED signs and strips require, with 12V and 24V outputs common in signage. GMH builds two families: the MH-12Vxx-F waterproof series (36W–350W, IP67, −30°C to +45°C, 3-year warranty) and the MH-12Vxx-B ultra-slim series (45W–350W, 12 mm case, IP20, 0°C to +45°C, 2-year warranty).

View product

Quality & Assurance

ISO 9001 quality system, powered ageing and IP65/IP67 waterproof checks on sealed products.

Quality capability

Tell us your sign project, get a product recommendation

Share your sign design — letter depth, face material, indoor or outdoor — and we will recommend the right LED modules, strip, power supply and protection rating, with a quotation. No obligation.

WhatsApp