Silicone Extrusion for LED Neon Flex

Silicone extrusion turns LED strips into bendable, dot-free neon flex with IP65/IP67 protection. Cuttable, uniform light for signage outlines since 2008.

GMH silicone neon flex extrusion forming a smooth continuous line of light for signage outlines
Extruded silicone neon flex, uniform and waterproof.
Short answer

Silicone extrusion wraps a populated LED strip in a continuous diffuser tube, producing a flexible line of light with no visible LED dots and added resistance to water and impact. GMH extrudes neon flex for signage outlines and architectural accents, in IP65 and IP67 versions on 12V and 24V systems, with a 2-year warranty.

When this process applies

This capability covers silicone-extruded neon flex built from our own LED strips. It does not cover extruded profiles for non-LED products or custom tooling for third parties.

Technical specifications

DiffuserExtruded silicone, flexible and cuttable
ProtectionIP65 and IP67 versions
Voltage12V and 24V
Light qualityDot-free, continuous line
ColoursSingle colour, RGB, RGBW
Warranty2 years

Where it is the right choice

  • Channel letter outlines and logo borders
  • Building facades and architectural outlines
  • Retail and hotel decorative lighting
  • Outdoor signage exposed to rain

Where it is the wrong choice

Stating this explicitly matters more than a capability list: if your part falls into one of these categories, another process will cost you less.

  • Applications needing a rigid, load-bearing profile
  • Very tight bends below the product minimum radius
  • Situations where the strip must be re-cut on site without re-sealing

Equipment

  • Silicone extrusion lines
  • Diffuser curing and cutting stations
  • End-cap and connector sealing
  • Ageing and waterproof checks
LED Strip & Neon Flex Extrusion

Process questions

Why does neon flex look smoother than a bare LED strip?

The silicone diffuser spreads each LED into a continuous line, hiding individual dots. A bare strip shows distinct points of light up close, which is why neon flex is preferred for visible sign outlines.

Can neon flex be cut to length?

Yes, at marked cutting intervals. On IP65/IP67 products the cut end must be re-sealed with an end cap or sealant to keep the waterproof rating — an unsealed cut is the most common cause of field failure.

What limits how tightly neon flex can bend?

Every profile has a minimum bend radius set by the internal PCB and LED layout. Bending tighter than that radius can crack the board and void the warranty. Tell us your tightest curve and we will recommend a profile.

Tell us your sign project, get a product recommendation

Share your sign design — letter depth, face material, indoor or outdoor — and we will recommend the right LED modules, strip, power supply and protection rating, with a quotation. No obligation.

WhatsApp