LED Matrix Panels for Vehicle and Shop Signage
Learn how 32×320, 32×256 and 16×96 LED matrix panels work, what pixel pitch means, and where mobile and shop signs use them.
GMH Lighting · Published September 22, 2026 · Updated October 25, 2026 · 5 min read
A LED matrix panel is a flat grid of addressable LEDs that displays text, graphics or animation, specified by resolution such as 32×320, 32×256 or 16×96 pixels. The 32×320 panel offers 32 rows by 320 columns for wide scrolling messages, while 16×96 suits compact displays. Vehicle and shop signs use these panels for programmable messaging at 12V or 24V.
Key points
- Common matrix resolutions are 32×320, 32×256 and 16×96 pixels.
- A 32×320 panel provides 10,240 addressable pixels for wide scrolling text.
- Panels typically run on 12V or 24V for vehicle and shop installations.
- Smaller pixel pitch means smoother images but a higher cost per square metre.
What a LED matrix panel is
A LED matrix panel is a flat display made of a grid of individually addressable LEDs. A controller switches specific pixels on and off to form text, simple graphics or animation. Unlike a channel letter, which is a fixed shape lit from within, a matrix panel is programmable — the message can be changed at any time.
Resolution is written as rows × columns. A 32×320 panel has 32 rows and 320 columns, giving 10,240 pixels. A 32×256 panel has 8,192 pixels, and a 16×96 panel has 1,536 pixels.
| Model | Rows × columns | Total pixels | Best for |
|---|---|---|---|
| 32×320 | 32 × 320 | 10,240 | Long scrolling messages |
| 32×256 | 32 × 256 | 8,192 | Medium-width displays |
| 16×96 | 16 × 96 | 1,536 | Short labels, compact signs |
How resolution affects readability
The number of rows decides how tall a character can be, and the number of columns decides how much text fits across the panel. A 32-row panel can form characters roughly 32 pixels tall, which stays legible at a distance. A 16-row panel is limited to shorter, smaller characters.
For a vehicle rooftop sign, the wide 32×320 format is popular because a message can scroll across 320 columns while remaining readable. A shop window sign may use 32×256 where the available width is smaller. The compact 16×96 panel suits price labels or short status messages.
Pixel pitch and image quality
Pixel pitch is the distance between the centres of adjacent pixels, usually measured in millimetres. A smaller pitch means pixels are closer together, producing a smoother image, but it also means more LEDs per square metre and a higher cost. For text-only signs, a larger pitch is acceptable; for graphics or video, a smaller pitch is needed.
| Application | Typical priority | Panel choice |
|---|---|---|
| Scrolling text | Readable character height | 32×320 or 32×256 |
| Short price label | Compact size | 16×96 |
| Shop window graphic | Smooth image | Higher resolution, smaller pitch |
| Vehicle message | Wide format, 12V power | 32×320 |
Power and installation
Vehicle and shop matrix panels typically run on 12V or 24V. Vehicle installations use the car’s 12V supply, while fixed shop signs may use either voltage depending on the controller and panel design. As with any LED system, size the power supply with 20% headroom — see the power supply sizing guide.
Vehicle signs add a mechanical challenge: vibration. Use a rigid mounting bracket, secure all connectors, and choose a panel with a suitable ingress rating if it will be exposed to rain. Local regulations on mobile advertising signage vary and should be checked before installation.
Browse the LED matrix panel range to compare resolutions and formats.
Controller compatibility
A matrix panel is only as capable as its controller. Before buying, confirm that the controller supports the panel’s resolution and whether it handles monochrome or full-colour RGB data. Some controllers are limited to text, while others can store animations or accept live input.
Basic panels display text and simple icons. Full-colour RGB panels can show video if the controller has sufficient bandwidth and the refresh rate is high enough to avoid flicker on camera. A 16×96 panel is generally too coarse for video; a higher-resolution panel is the sensible choice.
Common mistakes
- Choosing resolution by size alone. Character height depends on the row count.
- Ignoring the controller. An unsupported resolution will not display correctly.
- Under-sizing the power supply. Add 20% headroom to the panel’s rated draw.
- Overlooking vibration on vehicles. Secure the panel and every connector.
Designing messages for a matrix panel
A matrix panel is a low-resolution display, so message design matters more than with a printed sign. Three rules improve readability.
- Limit characters. A 32×320 panel fits roughly 20–40 characters per screen depending on character width. Shorter messages scroll faster and are easier to read.
- Use strong contrast. Bright text on a dark background reads best. Avoid thin fonts and low-contrast colour combinations, which disappear at distance.
- Control scroll speed. Text that moves too fast cannot be read; text that moves too slowly loses the viewer’s attention. Test the speed at the real viewing distance.
Viewing distance also decides the useful pixel pitch. A sign read from a car at 30 metres needs larger characters and a wider pitch than a shop window sign read from 3 metres. A 16×96 panel suits close-range labels, while the 32×320 and 32×256 formats are better for roadside and rooftop use.
Finally, consider the controller’s storage limit. If the sign must show several messages on a schedule, confirm how many can be stored and how quickly they can be changed.
Scope and limits
This page does not cover the internal LED driver circuits, scanning algorithms or refresh-rate theory behind matrix displays. It does not address fixed architectural LED video walls, which use different panel formats and installation standards. It also excludes regulatory approval for mobile signage, which depends on local law, and does not specify wind-load ratings for vehicle-mounted panels.
Related reading
- What is a LED channel letter?
- How to choose LED modules for channel letters and lightboxes
- How to size a power supply for LED signage
This article describes general manufacturing practice for machined and fabricated components. It is not a substitute for a drawing-specific engineering review — tolerances, material selection and process capability depend on the individual part.